变形，是指(1).改变原来的形态。(2).对原来事物的扭曲，亦指被扭曲过的事物。(3).物理学名词。物体受外力作用而产生体积或形状的改变。那么你知道变形用英文怎么说吗?下面来学习一下吧。
变形英语说法1：
deformation
变形英语说法2：
transformation
变形英语例句：
变形形状扭曲
A distortion in shape.
变形形状的扭曲
A distortion of shape.
既有弹性变形，又有塑性变形;
It has elastic deformation and plastic deformation.
如果杆的变形完全是非弹性变形时这也就没有什么区别了。
It would make no difference if the bar deformations were totally inelastic.
通过对试样断口形貌、试样变形区和未变形区金相组织的研究，认为：中厚板中心区域珠光体比例高是层状撕裂试样厚度中心呈现脆性的原因，这种脆性区导致在拉伸过程中最先萌生裂纹，并最终导致拉伸试样延伸率不合;
The laminar tearing always appeared in the fracture of the tensile sample.
得出第一横向变形约为第二横向变形的百分之五十。
The first lateral deformation nearly equals half of the second one.
在较高变形量下位错滑移也直接参与变形。
Dislocation slipping contributes to strain directly in high elongation.
机床导轨热变形是导轨变形的一种形式。
The hot deformation is one of the machine tool guideways deformations.
结果表明：过载拉伸时，在应力集中处会首先发生屈服，并伴有一定的拉伸塑性变形;
The result shows that the elements trend to yield and have plastic distortion first when the load is exerted.
抗滑桩加固边坡变形破坏特性离心模型试验研究
Centrifugal model tests on deformation of slopes reinforced with piles
这些夹具是必不可少的，以确保最优质的焊接变形和焊接过程中最低。
These jigs are essential to ensure the best quality welds and the minimum of distortion during the welding process.
这位学者说：“有蝴蝶翅膀的仙女如需飞翔，胸部的变形会很难受。
“ The distortion of the thorax needed for flight in fairies with butterfly wings would be exceedingly uncomfortable,” said the academic.
看来采用自由无阻尼正规模态可保证变形运动的线动量和角动量为零。
The use of the free undamped normal modes is seen to ensure that the linear and angular momenta of the distortional motion vanish.
低相变点焊条的焊接残余应力数值模拟随焊锤击降低薄板拼焊应力变形的研究
The Numerical Simulation of Low Transformation Temperature Electrodes Welding Residual Stress; Study on reducing welding stress and distortion of thin plate welding with trailing peening
所用珠子色彩绚丽丰富，艺术表现力强，并具不变形、不褪色之优质。
The beads used by the string bead decoration picture have flowery and rich color, strong artistic expressive force and excellent qualities of distortion free and fastness.
由实验结果得知，以聚芳醚酮作为核心材料的人工椎间盘在磨耗与变形上比以超高分子量聚乙烯作为核心之人工椎间盘有较好的表现。
From the experimental results we find that, using PEEK as the core material of the artificial intervertebral disc is better in the abrasion and the distortion than using UHMWPE.
加入均匀器后，周围附近的烟气温度场更均匀，这有利于减少色差和变形等烧成缺陷。
After the temperature equalizer was installed, the distribution of gas temperature around it was more uniform, which is helpful to reduce firing defects, such as color deviation and distortion.
齿轮在渗碳淬火中会产生变形，直接影响齿轮的精度，增大噪音，甚至造成偏载。
The distortion of gears will take place during carburizing and quenching and, as a result, reduce precision of the gears and increase noise, or will even cause unbalanced load-bearing of the gears.
GB/T3300-1991日用陶瓷器变形检验方法
Standard test method for deformation measurement of domestic ceramic ware